Disc Centrifuge

Disc Centrifuge Features:

Toper high quality disc centrifuge consists of a frame that has a horizontal drive shaft with clutch and brake, worm gear , lubricating oil bath and vertical bowl spindle in the lower part of the disc centrifuge. The disc centrifuge bowl is mounted on top of the spindle in the lower part. The bowl is mounted on top of the spindle , inside the space formed by the upper parts of the frame , the ring solid cover, the collecting cover, and frame hood . The feed and liquid discharge system , including the paring disc pump for the heavy phase, also rests on this structure. All parts in contact with the process liquid are made of stainless steel. The bowl is of the solid-ejecting disc type with hydraulic operating system. The electric motor is of the variable frequency drive type or of controlled-torque type.

Disc centrifuge basic equipment

Concentrator or purifier parts, inlet and outlet devices, revolution counter, set of erosion-protective parts ,illuminated sight glass box for light phase outlet , vibration switch , vibration-isolating base plate , flange motor, set of tool and standard set of spare.

Disc centrifuge optional extras

Started equipment, frequency converter, discharge control panel, standard set of fittings, set of CIP valves and fittings and serviceability package for online viewing of separator status

Disc centrifuge Material Data

Disc centrifuge bowl body , hood and locking ring SS 304 /316/ 321 Solids cover and frame hood S.S Frame bottom parts green cast iron , cald with In and outlet parts S.S Gasket and o-ring Nitrile rubber

Disc centrifuge operating principles

Separation takes place inside a rotating bowl. The feed is introduced to the rotating centrifuge bowl from the top via a stationary inlet pipe (1) And is accelerated in the distributor. (2) Which was specially designed to ensure smooth acceleration of the feed liquid. (3) The separation into liquid-liquid-solid takes place between the discs, with the oil phase moving through the disc stack to the centre. When it reaches the centre, it is discharged through hole . (4) Leaving the distributor, the feed enters the disc stack. (5)and ejected into the collecting frame. The water and heavy solid separated from the oil move to the periphery, and the water flows via channels in the top disc. (6)To the paring chamber, where it is pumped out of the rotor by means of a built-in paring disc. (7)During purification, hot water is fed into the inlet of the bowl before the process liquid is introduced. The water forms a seal around the outer edge of the top disc. The solid collect in the periphery where they are discharged intermittently via the centrifuge cyclone. The solid are discharged by means of a hydraulic system, which forces the sliding bowl bottom. (8)to drop down at preset suitable intervals, thus opening the solid ports at the bowl periphery.

Disc Centrifuge Application:

Toper disc centrifuge is widely used in pharmaceutical, food, chemical, biological products, beverage products, biodiesel, corn oil, peanut oil, palm oil, coconut oil, fish oil, lard, chicken fat, butter, vegetable juice, plant and herbal extracts, waste oil Chunhua, tea seeds, peanuts, angelica oil, seaweed industry and etc.

Disc Centrifuge Parameter:

Type DHC 300 DHC 400 DHC 500 DHC 550 DHC 730
Speed (r/min) 7300 7056 6600 6200 4500
Settling Area cm2 17.2×10^7 28.5×10^7 35×10^7 67×10^7 90×10^7
Trough Capacity(T/h) 2 5 10 15 35
Power (KW 4.0 7.5 11 18.5 55

Request a quotation

Feedback Form

Contact E-Mail: toperkey@hi-toper.com